User's Manual

Important Safety Instructions

1. Carefully read all of the instructions provided and save them for later use. Heed all

warnings and instructions marked on the BR-1022.

2. Do not place the BR-1022 on an unstable stand or surface as it may fall resulting in

serious damage.

3. The BR-1022 must be operated from a 120 Volts AC 60Hz @ TBDA power source

for the North America model, or from a 240 Volts AC 50Hz @ TBDA power source

for the European model. Operating voltage is factory set.

4. The BR-1022 power cord is equipped with a three-prong grounding plug that will

only fit into a grounding type power outlet. This is a safety feature. If you are unable

to insert the plug into the outlet, contact a qualified person to replace the obsolete

outlet. Do not tamper with the grounding prong to force fit into the outlet.

5. Do not allow any objects to rest on the power cord or place the BR-1022 where the

power cord will be trampled on.

6. If an extension cord is used with the BR-1022, make sure that the total ampere ratings

of the devices plugged into the extension cord do not exceed the extension cord

ampere rating.

7. Warning: No operator serviceable parts inside the BR-1022 radar unit. Please refer

servicing to service qualified personnel.