Installation Manual

9
For iOS phone:
1. Prepare a charger adaptor and a lightning data cable.
(Be advised that some cheap cables are for charging only and cannot transfer data. To
check, connect the phone to a computer using the cable. If the phone can be detected, then
the cable can transfer data)
Lighting sample picture
2. Plug the charger adaptor into an outlet, then connect the male USB side of
InfinitiKloud in the charger adaptor. Finally, connect the cable to the other end of
InfinitiKloud Charge. Plug the lightning port into your phone, and start using the
InfinitiKloud app.
Sample IK plugging concept