Spec Sheet

!
USER MANUAL |
!
20!
SRED ENCRYPTED MSR INFORMATION
Integrating the PCI PTS 3.x SRED certified Infinea TAB 4 into your solution
requires proper maintenance of the Infinea TAB 4 to insure long and trouble
free operation of the product.
This includes maintaining proper battery charge to prevent the Infinea TAB 4
from entering tamper detect mode. When the Infinea TAB 4 battery runs out
or if the battery is removed the magnetic read head security feature becomes
disabled and renders the unit unusable. This will require the unit to be sent
back to Infinite Peripherals for servicing.
To prevent down time caused by the magnetic read head security feature
becoming disabled follow the recommendations below:
• Do not allow the Infinea TAB 4 battery to fully discharge.
• Do not attempt to remove battery from Infinea TAB 4 unit.
• Always place the Infinea TAB 4 on charging station when not in use for
extended periods.
The battery capacity and approximate time remaining before full discharge are
shown in the table below. These values do not include daily usage of your
Infinea TAB 4 and iOS device:
Infinea TAB 4
Fully Charged
With iOS device
2,396 days
Without iOS device
2,396 days
Warning:
• When the Infinea TAB 4 battery is fully discharged and enters the
tamper detect mode, the unit can only be re-enabling at an Infinite
Peripherals authorized service facility or at an Infinite Peripherals
location.