Printer - Thermal Inkjet Printer User Manual

. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 19
DPP-350 User Manual v1.09
Pairing Info Details
♦ BAUD RATE: Default is 115200
♦ AUTO OFF TIME: Default is 5 minutes
♦ PRINT DENSITY: Default is 100%
♦ CHARACTER TABLE: Default is WESTERN (1252)
♦ PAIRING INFO: DEFAULT is (SAVE = No)
Notes:
When saving pairing information, the printer remembers Bluetooth
information of the last device connected (paired) to the printer.
Saving pairing info prevents the printer from asking for passkey
upon initialization. The process for using this option is described
below.
"To speed this programming process, you may bypass the memory
switch settings by indicating "NO" via pressing of the <ON/OFF>
button when the printer prints "CHANGE MEMORY SWITCHES" as
shown on page 17. This will advance you to the next level of
setting where pairing can be found".
Saving Pairing Info:
1. Following instruction on page-17, change the Pairing Info
option to [Save = Yes].
2. Turn the printer on and pair the printer to your Bluetooth
device.
3. The printer will now remember the pairing information and
not prompt user for a passkey on every printer initialization.
Clearing Pairing Info:
1. Following instruction on page-17, change the Pairing Info
option to [Save = No].
2. Turn on the printer and pair the new Bluetooth device to
the printer.
3. The printer will prompt user for a passkey on every printer
initialization.