Printer - Thermal Inkjet Printer User Manual

Setting Memory Switch
♦ MEMORY SWITCH SETTINGS:
Step #1: Make sure the printer is OFF (STATUS LED is OFF) before
performing step #2.
Step #2: Press and hold the line feed button (LF). While pressing
the (LF) button, press and hold the (ON) button
until the status LED display solid RED.
Step #3: Release the (ON) button and count (2) Beeps or until the
next solid RED LED is displayed. Release LF button
and follow the instruction printed.
Note: Care must be taken when changing factory preset
configuration information.
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com Page 17
DPP-350 User Manual v1.09