User's Manual

Modem configuration
Technical User Manual
InfiLINK XG – CLI commands
18
Sample command output:
#console>xg stat
Wireless Interface Statistics
Interface Status: UP
+--------------------------------------+--------------------------------------+
| Receive Statistics | Transmit Statistics |
+--------------------------------------+--------------------------------------+
|Air Frames Received 137926 |Air Frames Transmitted 70356 |
|Packets Received 2 |Packets Transmitted 3 |
+--------------------------------------+--------------------------------------+
Wireless Link Statistics
+----------------------+--------------+
|Wireless Link status |Up |
|Measured Distance |16 meters |
|Channel Width |40 MHz |
|DL/UL Ratio |50:50 |
+----------------------+--------------+
+---+-----------+--------------+---------------+---------------+--------------+
| Device Type | Master (local) | Slave (remote) |
+---+-----------+--------------+---------------+---------------+--------------+
|Tx Capacity | 156549 kbps | 143503 kbps |
+---+-----------+--------------+---------------+---------------+--------------+
| | Carrier 0 (carrier status Up) |
+---+-----------+--------------+---------------+---------------+--------------+
|Tx Frequency | 5600 MHz | 5600 MHz |
|AMC Mode | Auto | Auto |
+---+-----------+--------------+---------------+---------------+--------------+
| | Stream 0 | Stream 1 | Stream 0 | Stream 1 |
+---+-----------+--------------+---------------+---------------+--------------+
|TX |Tx Power |9.87 dBm |9.89 dBm |10.18 dBm |10.16 dBm |
+---+-----------+--------------+---------------+---------------+--------------+
|RX |Rx MCS |QAM256 6/8 (7)|QAM64 5/6 (6) |QAM256 6/8 (7) |QAM64 5/6 (6) |
| |CINR |30 dB |28 dB |31 dB |30 dB |
| |RSSI |-36 dBm |-36 dBm |-37 dBm |-37 dBm |
| |Acc TBER |0.0e0 (0.0%) |0.0e0 (0.0%) |0.0e0 (0.0%) |0.0e0 (0.0%) |# Acc
TBER - accumulated transmission block error rate
In order to clear statistics, use the command:
xg stat -clear
If you need to get information about radio subsystem capabilities, use the
command:
xg capabilities
Command outputs example:
#console>xg capabilities
Radio capabilities
General properties
Radio module name: RMU-55-05:41049
Antenna methods supported: MIMO
Duplex types supported: TDD
Frame periods supported: 1, 2, 5, 10 ms
Channel widths available: 10, 20, 40 MHz
Number of carriers: 1
Carrier 0 frequency range: 4900..6000 MHz
Carrier 0 Tx power range: 0..27/1 dBm
Carrier 0 configuration (Channel width 40 MHz, allocated DL/UL ratio 50:50 (28:28 air blocks), frame
period 1 ms, ttg/rtg (3:3 air blocks), qos strategy: normal):
+---------------+-------------------------------+-------------------------------+-------------------------------+
| MCS | Modulation | DL/UL capacity, kbps |Total rate, kbps |
+---------------+-------------------------------+-------------------------------+-------------------------------+
| 1 | QPSK 1/2 | 26091/26091 |57344 |