User's Manual

Modem configuration
Technical User Manual
InfiLINK XG – CLI commands
13
5. Modem configuration
5.1. Command description
5.1.1. IFC RADIO command
Use this command to enable or disable radio interface of the system.
Syntax:
#1> ifc radio {up | down}
5.1.2. XG command
Use this command to review and update air link parameters.
Syntax:
#1> xg [arguments]
#1> xg
usage:
xg -type {master | slave}
Radio frame params related
xg -tdd-sync-src {freerun | gnss}
xg -dlquota {1..99/1}
xg -sframelen {1 | 2 | 5 | 10}
xg -max-distance {0..120000/1}
xg -cell-id {0..15/1}
Radio front end related
xg -freq-dl {channel-width==10:4905..5995/10 | channel-
width==20:4910..5990/10 | channel-width==40:4920..5980/20}
xg -freq-ul {channel-width==10:4905..5995/10 | channel-
width==20:4910..5990/10 | channel-width==40:4920..5980/20}
xg -txpwr {0..27/1}
xg -channel-width {10 | 20 | 40}
Modulation related
xg -amc-strategy {normal | conservative | aggressive}
xg -max-mcs {1..10/1}
DFS/RSSI scan/Radar detection
Ethernet datapath related
xg -qos-strategy {normal | conservative | aggressive | off}
Supplementary
alias:
xg -freq <val> => xg -freq-dl <val> -freq-ul <val>
xg -appendconf-v2-start
xg -appendconf-v2 <encoded web config>
xg -appendconf-v2-end