User's Manual

GPS/GLONASS-receiver configuration
Technical User Manual
InfiLINK XG – CLI commands
11
CAUTION
Please note, that tcp and console commands and -r, -p and -s options are used for
diagnostics and debugging on emergency by specialists only.
Commands:
To start the operation of GPS service, use the following command:
start
To stop the operation of GPS service, use the following command:
stop
If you need to view statistics of GPS/GLONASS-receiver operation (without the
status information), use the following command:
stat
In order to clear the statistics, use the following command:
clear
If you need to view the information about the status of GPS/GLONASS-receiver
and its operation statistics, you can use the following command:
[coordinates]
Example of status information and statistics outputs:
console> gps coordinates
Satellites: 8
LAT/LONG: 56.811911/60.547041
Altitude: 275.89
HDOP: 0.92
FIX: 3D, GLONASS
Total GPS time: 17:43:19
Total nonvalid time: 00:00:01(0%)
Number of losses: 0
Now coordinates are valid last 17:43:18
Satellites histogram:
^
|
2.0 +
|
3.0 +
|
4.0 +
|
5.0 +
| <1%
6.0 +
| 1%
7.0 +
|||||||||||||||||||||||||||||||||||||||||||||||||| 99%
v
SATmin= 5 SATmax= 10
Satellites — quantity of currently visible satellites;