User's Manual

Switch configuration
Technical User Manual
InfiLINK XG – CLI commands
9
Set the GE1 port for processing of tagged packets of the VLAN 30 only (trunk
mode):
port 1 -allow=30 -mode=trunk
port vtt
VID 0 1 s r m STP Prio
==== = = = = = === ====
1 - - N N - - ----
30 A t t t A - ----
100 - - t t - - ----
Set the port SFP for processing of tagged packets of the VLAN 100 only (trunk
mode):
port s -allow=100 -mode=trunk
port vtt
VID 0 1 s r m STP Prio
==== = = = = = === ====
1 - - - N - - ----
30 A t - t A - ----
100 - - t t - - ----
Set the port RADIO for processing of tagged packets of the VLANs 30 and 100
(trunk mode):
port r -allow=30,100 -mode=trunk
port vtt
VID 0 1 s r m STP Prio
==== = = = = = === ====
30 A t - t A - ----
100 - - t t - - ----