User's Manual
Table Of Contents
- FCC and IC Statement
- Getting started
- 1.1. Document structure
- 1.2. Abbreviations
- 1.3. Document marks
- System Description
- 2.1. Introducing InfiLINK XG
- 2.2. Hardware Description
- 2.3. InfiLINK XG Specifications
- Installation
- 3.1. Installation Requirements
- 3.2. Equipment Positioning Guidelines
- 3.3. Installing the Outdoor Units
- 3.4. Installing the Indoor Unit
- Commissioning
- 4.1. Introduction
- 4.2. Step by step procedure
- Operation & Administration
- 5.1. Introduction
- 5.2. InfiLINK XG unit access
- 5.3. Status
- 5.3.1. Interface Statistics
- 5.3.2. Wireless Link Statistics
- 5.4. Antenna alignment
- 5.5. Maintenance
- 5.5.1. Firmware
- 5.5.2. Upload
- 5.5.3. Download
- 5.5.4. Bottom section of the page
- 5.6. Settings
- 5.6.1. General
- 5.6.2. Network Access
- 5.6.3. Radio
- 5.6.4. Switch
- 5.6.5. VLAN Switching
- 5.6.6. SNMP
- 5.6.7. Apply and Try buttons for the configuration
- 5.6.8. Configuring QoS
- 5.6.9. Configuring per-VLAN 802.1p priority assignment
- Troubleshooting
- 5
- 6.1. Introduction
- 6.2. The wireless link is down (it got lost)
- 6.3. No access to the local unit
- 6.4. Expected capacity is not met
- 6.5. Errors on the wireless link, throughput fluctuations
- 6.6. No data is being transferred
- 6.7. The management of the unit is lost
- 6.7.1. ERConsole recovery procedure
- 6.7.2. Restore to factory settings using ERConsole
Chapter 2 - System Description
Technical User Manual
InfiLINK XG
18
Timing
Transport
IEEE 1588 v2, transparent clock
Table 13 - Networking Specification
2.3.4. Configuration Management
Parameter Description
LED Indication
Power status, wireless and wired link status, RSSI indication,
TDD sync status
Management
Protocols
HTTP, telnet, SNMP v1/2c/3 (MIB-II and proprietary MIBs)
Installation
Tools
Antenna alignment tool
Table 14 - Management Specification
2.3.5. Electrical Characteristics
Parameter Description
Power Supply
IDU-BS-G: 100-240 VAC, 50/60Hz, 0°C to +40°C, I24x72x38
mm, 0.3 Kg
Input DC range
±43 to ±56 VDC
Consumption
Up to a maximum of 30 W
PoE type
Passive PoE
Table 15 - Electrical Specification
2.3.6. Physical Environmental
Parameter Description
Weight and
Dimensions
Part Number
Weight
Size
Xm/5X.500.2x500.2x23
2.4 Kg 305x305x59 mm
Xm/6X.500.2x500.2x24
Xm/5X.500.2x500.2x26
3.1 Kg
371x371x83 mm
Xm/5X.500.2x500.2x28
6.2 Kg 600x600x75 mm
Xm/6X.500.2x500.2x27
Um/5X.500.2x500
2.1 Kg 253x240x85 mm
Um/6X.500.2x500