User's Manual
Table Of Contents
- Table of contents
- I. Getting Started
- II. Hardware description
- III. Installation procedure
- 1. Installation preparations
- 2. InfiNet Wireless R5000-Omx/Omxb
- 3. InfiNet Wireless R5000-Lmn
- 4. InfiNet Wireless R5000-M/Mm and R5000-Smn/Smnb/Smnc
- 5. Mounting kit (MOUNT-KIT-85)
- 8. InfiNet Wireless R5000-Smnc
- II. Configuration (Web-interface)
- III. Configuration (CLI)
- IV. Link setup
- V. Lost password recovery
- VI. Recommendations
- VII. Supplementary information
68
Copyright © 2004-2012 by InfiNet Wireless
Click Add SNMP v3 User to setup SNMP v3 operation.
• User Name – the username for the new SNMP v3 user.
• Password – new user's password. Must be at least 8 characters long.
• Security – three security levels are available for each SNMP v3 user:
o No Authorization No Privacy – SNMP messages are sent
unauthorized and unencoded.
o Authorization No Privacy – SNMP messages are sent authorized
and unencoded.
o Authorization and Privacy – SNMP messages are sent
authenticated and encoded. The passphrase for the encoding
can be set using the Privacy Password field.
• Readonly – this checkbox toggles Write operations restriction for the
current user.
• Admin – toggles full access to all variables. By default all users have
limited access.
• Remove User – removes the user from the SNMP configuration.