User's Manual

InfiNet Wireless R5000 Technical User Manual

―Start Test‖/‖Stop Test‖ buttons at the bottom of the page start/stop the

alignment test.

―Back‖ button returns to the ―Device Status‖ page.

Once the test is started antenna alignment can be monitored using graphical and

text indicators. Indicators for both local and remote devices are displayed

together on the same page that allows viewing the alignment process for both

sides of the link.

Each side of the link (local and remote) has two similar test indicator sets

corresponding to two antenna polarizations (rx chains) of the device (one for

Vertical polarization and another for Horizontal). This allows controlling the

alignment process for each antenna polarizations for local and remote devices

simultaneously.

Text indicators are the following:

Error Vector Magnitude (EVM) – indicator of the measured input signal

quality. It should be as high as possible. The recommended level is not

less than 21.

Chain 0 Signal Level – input signal level indicator of antenna number 0

(vertical polarization).

Chain 1 Signal Level – input signal level indicator of antenna number 1

(horizontal polarization).

Retries – percentage of transmit packet retries.

Graphical indicator: