User's Manual

InfiNet Wireless R5000 Technical User Manual

Link Settings

This section allows viewing/setting the following link parameters:

Interface – available radio interface (or PRF interface)

Network SID - Network System Identifier (up to 8-digit HEX figure). All

units that are supposed to see each other on the same radio link must

have the same SID value

Node Name - the network name for the node

Node ID - the sequential number for the node. The parameter is optional

Security Key - key word to encode protocol messages. The key can be up

to 64 characters long and should not contain spaces (or should be put in

quotes). All units that are supposed to see each other on the same radio

link must have the same Security Key

Encryption – enables hardware-accelerated AES-128 encryption for all the

traffic

Marker Access - turns marker access (Polling) mode on. This mode is

recommended for PMP and long PTP links (7+ km). Should be enabled

just at the Base Station or at one side of the PTP link (do not enable

polling at both sides, otherwise wireless connection will fail!)

Join Interfaces - allows radio and Pseudo-RF interfaces of the unit to

interconnect with each other as if they are two separate network nodes.

Please see the full description of the Join function in OS WANFleX User

Manual.