User's Manual

InfiNet Wireless R5000 Technical User Manual

Password - secret password used to login to the unit

Confirm Password - password confirmation

―Keep current system password‖ check-box – saves currently used

password in the unit‘s configuration and locks ―Password‖ and ―Confirm

Password‖ fields. In case this check-box is leaved unchecked and

―Password‖ and ―Confirm Password‖ fields are empty some web

browsers may spontaneously put random data into them so that after

the configuration is applied the password will be unknown to the user.

Radio Settings

This section allows viewing/setting the following radio parameters:

Interface –available radio interface

Type – network type of the node (Master, Slave)

Channel Width - operating channel bandwidth of the radio in MHz. Must

be equal at both sides of the link

DFS – allows starting DFS (Dynamic Frequency Selection) service or DFS

without Radar Detection

Frequency - central operating frequency in MHz. Must be equal at both

sides of the link.

Frequency range list - list of frequencies allowed for choosing by DFS

service

TX Power - output power of the radio in dBm. ―Auto‖ field enables ATPC

function (recommended)

Tx Bitrate - fixed operating bitrate (if numerical value chosen) or auto

bitrate (Automatic Modulation Control) if "Auto" is chosen. ―Autobitrate‖

is recommended