User's Manual

InfiNet Wireless R5000 Technical User Manual
Copyright © 2004-2011 by InfiNet Wireless
80
7. Spectrum Analyzer
The «Spectrum Analyzer» page provides deep analysis of radio emission sources.
In this mode device scans the radio spectrum on all available frequencies. To
obtain information as complete as possible, the scanning process may take some
time.
The following parameters can be set to manage «Spectrum Analyzer» operation:
 Unit‘s radio interface
 Start frequency, determining the initial frequency for scanning in MHz
 Stop frequency, determining the ending frequency for scanning in MHz
 Band - bandwidth in MHz
 Step – scanning frequency step in MHz
It is recommended to set 1 MHz ―step‖ value to get more
precise scanning results.
 Channel mask – specifies which antenna will scan the radio environment.
―Auto‖ value set scanning by both antennas. This parameter is applicable
only to ―R5000-Xm‖ models
 Scan Duration – time period for scanning in seconds. After the end of
this time period scanning will be stopped and radio interface will be back
to normal mode operation