Datasheet

TLE7269G
Pin Configuration
Data Sheet 6 Rev. 1.2, 2007-11-13
8 INH2 Inhibit output 2;
battery supply related output
HIGH (
V
S
) in Normal and Stand-By operation mode
can be used to control an external voltage regulator
can be used to control external bus termination resistor when the device will be used
as Master node
9W2OWake BUS 2 OFF;
switch off Wake-Up feature on BUS 2; active HIGH,
integrated pull-down
10 BUS 2 Bus 2 input / output;
LIN bus line input/output
LOW in dominant state
Internal termination and pull-up current source
11 GND Ground
12 BUS 1 Bus 1 input / output;
LIN bus line input/output
LOW in dominant state
Internal termination and pull-up current source
13 V
S
Battery supply input
14 INH1 Inhibit output 1;
battery supply related output
HIGH (
V
S
) in Normal and Stand-By operation mode
can be used to control an external voltage regulator
can be used to control external bus termination resistor when the device will be used
as Master node
Table 1 Pin Definitions and Functions (cont’d)
Pin No. Symbol Function