Datasheet

TLE7250GVIO
Pin Configuration
Data Sheet 5 Rev. 1.0, 2012-03-14
3 Pin Configuration
3.1 Pin Assignment
Figure 2 Pin configuration
3.2 Pin Definitions and Functions
Table 1 Pin Definition and Functions
Pin Symbol Function
1TxD Transmit Data Input;
internal pull-up to
V
IO
, “low” for “dominant” state.
2GND Ground
3
V
CC
Transceiver Supply Voltage;
100 nF decoupling capacitor to GND required.
4RxD Receive Data Output;
“low” in “dominant” state.
5
V
IO
Digital Supply Voltage Input;
supply voltage input to adapt the logical input and output voltage levels of the
transceiver to the microcontroller supply.
100 nF decoupling capacitor to GND required.
6CANL CAN Bus Low Level I/O;
“low” in “dominant” state.
7CANH CAN Bus High Level I/O;
“high” in “dominant” state.
8NEN Not Enable Input
1)
;
internal pull-up to
V
IO
, “low” for normal-operating mode.
1) The designation of pin 8 is different in the TLE7250GVIO and its predecessor, the TLE6250GV33. The function of pin 8
remains the same.
TxD
1
2
3
45
6
7
8
RxD
NEN
GND
V
CC
CANH
CANL
V
IO