Datasheet

PG-DSO-14
Type Package Marking
TLE6251-3G PG-DSO-14 TLE6251-3G
Data Sheet 3 Rev. 1.1, 2011-06-06
High Speed CAN-Transceiver with Wake and Failure
Detection
TLE6251-3G
1Overview
Features
• HS CAN Transceiver with data transmission rates up to 1 MBaud
• Compliant to ISO 11898-5
• Very low power consumption in Sleep mode
• Bus Wake-Up and local Wake-Up
• Inhibit output to control external circuitry
• Separate
V
IO
input to adapt different micro controller supply voltages
• Separate output for failure diagnosis
• Optimized for low electromagnetic emission (EME)
• Optimized for a high immunity against electromagnetic interference (EMI)
• Very high ESD robustness, ± 9 kV according to IEC 61000-4-2
• Protected against automotive transients
• Receive-Only mode for node failure analysis
• TxD time-out function and RxD recessive clamping with failure indication
• TxD to RxD short circuit recognition with failure indication
• CANH and CANL short circuit recognition with failure indication
• Bus dominant clamping diagnosis
• Under-voltage detection at
V
CC
, V
IO
and V
S
• Power-Up and Wake-Up source recognition
• Short circuit proof and Over-Temperature protection
• Green Product (RoHS compliant)
• AEC Qualified
Description
As a successor of the TLE6251G, the TLE6251-3G is designed to provide an excellent passive behavior in Power Down.
This feature makes the TLE6251-3G extremely suitable for mixed power supply HS-CAN networks. The TLE6251-3G
provides different operation modes with a very low quiescent current in Sleep mode. Based on the high symmetry of the
CANH and CANL signals, the TLE6251-3G provides a very low level of electromagnetic emission (EME) within a broad
frequency range. The TLE6251-3G is integrated in a RoHS compliant PG-DSO-14 package and fulfills or exceeds the
requirements of the ISO11898-5. The TLE6251G and the TLE6251-3G are fully pin compatible and function compatible.
Based on the Infineon Smart Power Technology SPT
®
, the TLE6251-3G provides industry leading ESD
robustness together with a very high electromagnetic immunity (EMI). The Infineon Smart Power Technology
SPT
®
allows bipolar and CMOS control circuitry in accordance with DMOS power devices to exist on the same
monolithic circuit. The TLE6251-3G and the Infineon SPT
®
technology are AEC qualified and tailored to withstand
the harsh conditions of the automotive environment.