Datasheet

Data Sheet 5 Rev. 1.12, 2011-05-11
TLE4296-2
General Product Characteristics
4 General Product Characteristics
4.1 Absolute Maximum Ratings
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Absolute Maximum Ratings
1)
T
j
= -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
1) Not subject to production test, specified by design.
Pos. Parameter Symbol Limit Values Unit Conditions
Min. Max.
Input
4.1.1 Voltage
V
I
-42 45 V –
4.1.2 Current
I
I
––mA
2)
2) Internally limited
Output
4.1.3 Voltage
V
Q
-0.3 30 V –
4.1.4 Current
I
Q
––mA
2)
Inhibit
4.1.5 Voltage
V
INH
-42 45 V –
4.1.6 Current
I
INH
-500
2)
A–
4.1.7 Current
I
INH
-5 5 mA -0.3 V ≤ V
I
≤ 45 V ;
t
p
< 1 ms
Temperatures
4.1.8 Junction Temperature
T
j
-40 150 °C–
4.1.9 Storage Temperature
T
stg
-50 150 °C–
Thermal Resistance
4.1.10 Junction Pin
R
thj-pin
– 30 K/W Measured to pin 5
4.1.11 Junction ambient
3)
3) Worst case regarding peak temperature
R
thja
– 179 K/W Zero airflow ;
zero heat sink area