Datasheet

TLE4294
General Product Characteristics
Data Sheet 5 Rev. 1.1, 2008-02-26
4 General Product Characteristics
4.1 Absolute Maximum Ratings
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
4.2 Functional Range
Note: Within the functional range the IC operates as described in the circuit description. The electrical
characteristics are specified within the conditions given in the related electrical characteristics table.
Absolute Maximum Ratings
1)
T
j
= -40 °C to +150 °C, all voltages with respect to ground, direction of currents as shown in Figure 3 “Application
Circuit” on Page 7 (unless otherwise specified)
1) Not subject to production test, specified by design.
Pos. Parameter Symbol Limit Values Unit Conditions
Min. Max.
Input
4.1.1 Voltage
V
I
-42 45 V –
4.1.2 Current
I
I
– – mA Internally limited
Output
4.1.3 Voltage
V
Q
-6 30 V –
4.1.4 Current
I
Q
– – mA Internally limited
Temperatures
4.1.5 Junction temperature
T
j
-40 150 °C–
4.1.6 Storage temperature
T
stg
-50 150 °C–
ESD Susceptibility
4.1.7 ESD Resistivity
V
ESD
-2 2 kV HBM
2)
2) ESD susceptibility, Human Body Model “HBM” according to EIA/JESD 22-A114B
4.1.8 ESD Resistivity to GND V
ESD
-750 750 V CDM
3)
3) ESD susceptibility, Charged Device Model “CDM” according to EIA/JESD22-C101 or ESDA STM5.3.1
Pos. Parameter Symbol Limit Values Unit Conditions
Min. Max.
4.2.1 Input Voltage
V
I
5.5 45 V –
4.2.2 Output Capacitor Requirements
C
Q
2.2 – μF–
4.2.3
ESR
CQ
1.5 8 Ω
1)
1) Equivalent series resistance measured at a frequency of 10 kHz
4.2.4 Junction Temperature T
j
-40 150 °C–