Datasheet

TLE42764
Pin Configuration
Data Sheet 4 Rev. 1.1, 2009-10-09
3 Pin Configuration
3.1 Pin Assignment PG-TO263-5, PG-TO252-5
Figure 2 Pin Configuration (top view)
3.2 Pin Definitions and Functions PG-TO263-5, PG-TO252-5
Pin No. Symbol Function
1IInput
block to ground directly at the IC with a ceramic capacitor
2ENEnable Input
high level input signal enables the IC;
low level input signal disables the IC;
integrated pull-down resistor
3GNDGround
internally connected to heat slug
4n.c.
VA
not connected for TLE42764GV50, TLE42764DV50
can be open or connected to GND
Voltage Adjust Input for TLE42764GV, TLE42764DV
connect external voltage divider to configure the output voltage
5QOutput
block to ground with a capacitor close to the IC terminals, respecting the values given
for its capacitance and ESR in “Functional Range” on Page 5
Heat Slug – Heat Slug
internally connected to GND;
connect to GND and heatsink area
AEP02560
15
EN
I
n.c.
Q
VA
GND
PinC onfi g_PG-TO-263-5-1.vs d
12345
I
EN
GND
n.c.
Q
VA
GND