Datasheet

TLE42754
Pin Configuration
Data Sheet 5 Rev. 1.11, 2012-01-20
3 Pin Configuration
3.1 Pin Assignment TLE42754D (PG-TO252-5) and TLE42754G (PG-TO263-5)
Figure 2 Pin Configuration (top view)
3.2 Pin Definitions and Functions TLE42754D (PG-TO252-5) and TLE42754G (PG-
TO263-5)
Pin Symbol Function
1I Input
for compensating line influences, a capacitor to GND close to the IC terminals is
recommended
2RO Reset Output
open collector output; external pull-up resistor to a positive potential required;
leave open if the reset function is not needed
3GND TLE42754G (PG-TO263-5) only: Ground
internally connected to tab
4D Reset Delay Timing
connect a ceramic capacitor to GND for adjusting the reset delay time;
leave open if the reset function is not needed
5Q Output
block to GND with a capacitor close to the IC terminals, respecting the values given
for its capacitance C
Q
and ESR in the table “Functional Range” on Page 8
TAB GND Ground
connect to heatsink area
AEP02580
15
ROΙ DQ
GND
GND
RO
Ι
IEP02528
D
Q
P-TO252-5 (D-PAK) P-TO263-5 (D²-PAK)