Datasheet

Data Sheet 8 Rev. 1.2, 2010-11-26
TLE42694
General Product Characteristics
4 General Product Characteristics
4.1 Absolute Maximum Ratings
-40 °C ≤ T
j
≤ 150 °C; all voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter Symbol Limit Values Unit Conditions
Min. Max.
Voltage
V
I
, V
SI
-40 45 V –
Voltage
V
Q
, V
RO
,
V
SO
, V
D
-0.3 7 V –
Voltage
V
RADJ
-0.3 7 V –
Current
I
RADJ
-10 10 mA –
Junction Temperature
T
j
-40 150 °C –
Storage Temperature
T
stg
-50 150 °C –
Human Body Model (HBM)
2)
2) ESD HBM Test according to AEC-Q100-002 - JESD22-A114
Voltage -2 2 kV –
Charged Device Model (CDM)
3)
3) ESD CDM Test according to ESDA ESD-STM5.3.1
Voltage -1 1 kV –
Note: Maximum ratings are absolute ratings; exceeding any
one of these values may cause irreversible damage
to the integrated circuit. Integrated protection functions are designed to prevent IC destruction under fault
conditions. Fault conditions are considered as outside normal operating range. Protections functions are not
designed for continuous repetitive operation.
Absolute Maximum Ratings
1)
1) not subject to production test, specified by design
Input, Sense Input
4.1.1
Output, Reset Output, Sense Output, Reset Delay
4.1.2
Reset Threshold
4.1.3
4.1.4
Temperature
4.1.5
4.1.6
ESD Susceptibility
4.1.7
4.1.8