Datasheet

TLE 4262

Data Sheet 3 Rev. 2.8, 2008-05-19

Table 1 Pin Definitions and Functions

PG-DSO-14-

PG-DSO-20-

Symbol Function

12ROReset output; open-collector output

internally connected to the output via a

resistor of 30 kΩ.

2, 8 3, 8, 12, 13,

18, 19

N.C. Not connected

3 - 5,

10 - 12

4 - 7,

14 - 17

GND Ground

69DReset delay; connect capacitor to GND for

setting delay time

710RADJReset threshold; for setting the switching

threshold connect by a voltage divider from

output to ground. If this input is connected to

GND, reset is triggered at an output voltage

of 4.5 V.

911Q5-V output voltage; block to ground by

capacitor with

C ≥ 22 µF, ESR ≤ 3 Ω at

10 kHz.

13 20 I Input voltage; block to ground directly at the

IC by a ceramic capacitor.

14 1 INH Inhibit; TTL-compatible, low-active input