Datasheet

Data Sheet 4 Rev. 1.0, 2008-05-09
TLE 4252 G
Note: Stresses above the ones listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault
conditions described in the data sheet. Fault conditions are considered as
“outside” normal operating range. Protection functions are not designed for
continuous repetitive operation
.
Table 2 Absolute Maximum Ratings
Parameter Symbol Limit Values Unit Remarks
Min. Max.
Supply Voltage Input I
Voltage
V
I
-42 45 V –
Current
I
I
– – A Limited internally
1)
Enable Input EN
Voltage
V
EN
-42 45 V –
Current
I
EN
– – A Limited internally
Adjust Input ADJ
Voltage
V
ADJ
-42 45 V –
Current
I
ADJ
– – A Limited internally
Output Q
Voltage
V
Q
-2 45 V –
Current
I
Q
– – A Limited internally
Temperature
Junction temperature
T
j
-40 150 °C–
Storage temperature
T
stg
-50 150 °C–
ESD-Protection
Voltage
V
ESD
-2 2 kV Human Body Model
(HBM)
1) For reverse current flowing in case of negative supply voltage, see table “Electrical Characteristics” on
Page 6. A reverse current may heat up the device. The integrated temperature protection is not operating at
negative supply voltage.