Datasheet

Datasheet 17 Revision 2.3, 2013-05-16
ISOFACE™
ISO1H815G
Electrical Characteristics
4.9 Reverse Voltage
4.10 Isolation and Safety-Related Specification
4.11 Reliability
For Qualification Report please contact your local Infineon Technologies office!
Parameter
at T
j
= -25 ... 125°C, V
bb
=15...30V, V
CC
=3.0...5.5V, unless
otherwise specified
Symbol Limit Values Unit Test Condition
min. typ. max.
Reverse voltage
1)2)
R
GND
= 0 Ω
R
GND
= 150 Ω
1) defined by P
tot
2) not subject to production test, specified by design
-V
bb
⎯
⎯
⎯
⎯
1
45
V
Diode forward on voltage
IF = 1.25A, V
Dx
= low, each channel
-V
ON
⎯⎯1.2
Parameter
Measured from input terminals to output terminals,
unless otherwise specified
Value Unit Conditions
Rated dielectric isolation voltage V
ISO
500 V
AC
1 - minute duration
1)
1) The parameter is not subject to production test, verified by characterization; Production Test with 1100V, 100ms duration
Short term temporary overvoltage 1250 V 5s acc. DIN EN60664-1
1)
Minimum external air gap (clearance) 2.6 mm shortest distance through air.
Minimum external tracking (creepage) 2.6 mm shortest distance path along body.
Minimum Internal Gap 0.01 mm Insulation distance through
insulation