Datasheet

ISO1H801G
Revision History: 2009-09-16 Version 2.3
Previous Version: V2.2
V2.0 Final Datasheet
V2.1 Final Datasheet
V2.2
Page 15 creepage, clearance distance and V
ISO
adapted,
V2.3
Diagnostic output discontinued
Edition 2009-09-16
Published by Infineon Technologies AG,
A
m Campeon 1-12,
8
5579 Neubiberg, Germany
©
Infineon Technologies AG 2009.
A
ll Rights Reserved.
A
ttention please!
T
he information herein is given to describe certain components and shall not be considered as a guarantee of
c
haracteristics.
T
erms of delivery and rights to technical change reserved.
W
e hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding
c
ircuits, descriptions and charts stated herein.
I
nformation
For further information on technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies Office (www.infineon.com).
W
arnings
Due to technical requirements components may contain dangerous substances. For information on the types in
q
uestion please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written
a
pproval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
o
f that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support
d
evices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain
a
nd/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
b
e endangered.