Datasheet

ISOFACE™
ISO1H801G
Electrical Characteristics
Datasheet 15 Version 2.3, 2009-09-16
4.9 Reverse Voltage
Parameter
at T
j
= -25 ... 125°C, V
bb
=15...30V, V
CC
=4.5...5.5V, unless
otherwise specified
Symbol Limit Values Unit Test Condition
min. typ. max.
Reverse voltage
1) defined by P
tot
2) not subject to production test, specified by design
1)2)
R
GND
= 0 Ω
R
GND
= 150 Ω
-V
bb




1
45
V
Diode forward on voltage
IF = 1.25A, V
Dx
= low, each channel
-V
ON
  1.2
4.10 Isolation and Safety-Related Specification
Parameter
Measured from input terminals to output terminals,
unless otherwise specified
Value Unit Conditions
Rated dielectric isolation voltage V
ISO
500 V
AC
1 minute duration
1) The parameter is not subject to production test, verified by characterization; Production Test with 1100V, 100ms duration
1)
Minimum external air gap (clearance) 2.6 mm shortest distance through air.
Minimum external tracking (creepage) 2.6 mm shortest distance path along body.
Minimum Internal Gap 0.01 mm Insulation distance through
insulation
Note: For Qualification Report contact your local Infineon Technologies office!