Information

Product Brief
IFX9201SG
6 A H-bridge with SPI diagnosis
IFX9201SG is a general purpose 6 A H-bridge. It is designed for the control of small DC
motors and inductive loads.
Based on the automotive know-how, the IFX9201SG is optimized for non automotive
applications such as industrial applications, home appliances and building automation,
power tools battery management and electric toys.
The outputs can be pulse width modulated at frequencies up to 20 kHz by means of
PWM/DIR control. While the signal at the DIR input defines the direction of the DC motor,
the PWM signal controls the duty cycle. PWM/DIR control reduces the number of PWM
capable pins needed at the microcontroller.
For load currents above the current limitation threshold (8 A typ) the H-bridge switches
into chopper current limitation mode.
The IFX9201SG is protected against short circuits and over temperature and provides
diagnosis via SPI or basic error feedback via status flag. Open load can be detected when
the bridge is disabled or during PWM operation of inductive loads.
The robust PDSO-12 package provides excellent thermal performance due to the thick
copper heat slug and is well suited for automatic optical solder inspection.
Applications
DC motor control for industrial applications
Home and building automation
Power tools battery management
Industrial robotic applications
Electric toys
R
DS(on)
(typ) = 100 mΩ per switch
Operation voltage 5.0 V to 36.0 V
3.3 V and 5.0 V compatible logic
inputs (TTL/ CMOS)
Low stand-by current
Short circuit and overtemperature
protection
V
S
undervoltage shutdown
Open load detection in ON and OFF
state
Detailed SPI diagnosis or simple
error flag
Green product (RoHS compliant)
Small package saves board space
Includes over current and overtem-
perature protection
Simple design with few external
components
SPI enables for easy diagnosis
Key features
Key benefits
www.infineon.com/industrial-h-bridge

Summary of content (2 pages)