BAR64... Silicon PIN Diode • High voltage current controlled RF resistor for RF attenuator and switches • Frequency range above 1 MHz up to 6 GHz • Very low capacitance at zero volt reverse bias at frequencies above 1 GHz (typ. 0.17 pF) • Low forward resistance (typ. 2.
BAR64... Maximum Ratings at T A = 25°C, unless otherwise specified Symbol Parameter Value Unit Diode reverse voltage VR 150 V Forward current IF 100 mA Total power dissipation Ptot mW BAR64-02LRH, TS ≤ 135 °C 250 BAR64-02V, TS ≤ 125 °C 250 BAR64-03W, BAR64-07, T S ≤ 25 °C BAR64-04, -05, -06, TS ≤ 65 °C 250 BAR64-04W, -05W, -06W, TS ≤ 115 °C 250 250 150 Junction temperature Tj Operating temperature range Top -55 ... 125 Storage temperature Tstg -55 ...
BAR64... Electrical Characteristics at T A = 25°C, unless otherwise specified Parameter Symbol Values min. typ. Unit max. AC Characteristics Diode capacitance pF CT VR = 20 V, f = 1 MHz - 0.23 0.35 VR = 0 V, f = 100 MHz - 0.3 - VR = 0 V, f = 1...1.8 GHz, BAR64-02LRH - 0.13 - VR = 0 V, f = 1...1.8 GHz, all other - 0.17 - Reverse parallel resistance kΩ RP VR = 0 V, f = 100 MHz - 10 - VR = 0 V, f = 1 GHz - 4 - VR = 0 V, f = 1.
BAR64... Diode capacitance CT = ƒ (VR) Reverse parallel resistance RP = ƒ(VR) f = Parameter f = Parameter 10 4 0.7 KOhm pF 0.5 Rp CT 10 3 1 MHz 100 MHz 1 GHz 1.8 GHz 0.4 100 MHz 1 GHz 1.8 GHz 10 2 10 1 0.3 10 0 0.2 0.
BAR64...
BAR64... Forward current IF = ƒ (TS ) BAR64-04W, BAR64-05W, BAR64-06W 120 mA 100 90 IF 80 70 60 50 40 30 20 10 0 0 15 30 45 60 90 105 120 °C 75 150 TS Permissible Puls Load RthJS = ƒ (t p) Permissible Pulse Load BAR64-02LRH IFmax / IFDC = ƒ (t p) BAR64-02LRH 10 2 10 2 IFmax/IFDC RthJS K/W 10 1 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0.5 0.2 0.1 0.05 0.02 0.01 0.
BAR64... Permissible Puls Load RthJS = ƒ (t p) Permissible Pulse Load BAR64-02V IFmax / IFDC = ƒ (t p) BAR64-02V 10 3 10 2 IFmax / IFDC K/W RthJS 10 2 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.
BAR64... Permissible Puls Load RthJS = ƒ (t p) Permissible Pulse Load BAR64-04W, BAR64-05W, BAR64-06W IFmax / IFDC = ƒ (t p) BAR64-04W, BAR64-05W, BAR64-06W 3 10 10 2 IFmax/IFDC K/W RthJS 10 2 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 0.5 0.2 0.1 0.05 0.02 0.01 0.
Package SC79 9 BAR64...
BAR64...
Package SOD323 11 BAR64...
Package SOT143 BAR64... 2 0.1 MAX. 10˚ MAX. 1 1 ±0.1 0.2 0.8 +0.1 -0.05 0.4 +0.1 -0.05 A 5 0...8˚ 0.2 M A 0.25 M B 1.7 0.08...0.1 1.3 ±0.1 3 2.4 ±0.15 4 B 10˚ MAX. 2.9 ±0.1 1.9 0.15 MIN. Package Outline Foot Print 1.2 0.8 0.9 1.1 0.9 0.8 1.2 0.8 0.8 Marking Layout (Example) RF s 56 Manufacturer Pin 1 2005, June Date code (YM) BFP181 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.6 8 4 Pin 1 3.15 1.
Package SOT23 BAR64... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 ±0.1 1 2.4 ±0.15 3 0.1 MAX. 10˚ MAX. B 1 ±0.1 10˚ MAX. 2.9 ±0.1 0.15 MIN. Package Outline A 5 0...8˚ 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.
Package SOT323 BAR64... Package Outline 0.9 ±0.1 2 ±0.2 0.3 +0.1 -0.05 0.1 MAX. 3x 0.1 M 0.1 A 1 2 1.25 ±0.1 0.1 MIN. 2.1 ±0.1 3 0.15 +0.1 -0.05 0.65 0.65 0.2 M A Foot Print 0.8 1.6 0.6 0.65 0.65 Marking Layout (Example) Manufacturer 2005, June Date code (YM) BCR108W Type code Pin 1 Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø330 mm = 10.000 Pieces/Reel 0.2 2.3 8 4 Pin 1 2.15 1.
Package TSLP-2-7 BAR64... Package Outline Top view Bottom view 0.39 +0.01 -0.03 0.6 ±0.05 0.05 MAX. 1 1 0.25 ±0.035 1) 2 1±0.05 0.65 ±0.05 2 0.5 ±0.035 1) Cathode marking 1) Dimension applies to plated terminal Foot Print 0.45 Copper Solder mask 0.375 0.35 0.275 1 0.925 0.3 0.35 0.6 0.
BAR64... Edition 2009-11-16 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
