User's Manual

6
Reference design 60 GHz radar FF module
User manual and integration instructions
Hardware information
2.2 Module pin definitions
Figure 3 Components on the module
Table 2 P1 pin definitions
Pin no.
Signal name
Description
P1-1
DC_IN
Power supply input. Range from 3.6 V to 5.5 V.
P1-2
DC_IN
Power supply input. Range from 3.6 V to 5.5 V.
P1-3
NC
Not used
P1-4
NC
Not used
P1-5
NC
Not used
P1-6
NC
Not used
P1-7
NC
Not used
P1-8
nRESET
Reset for radar module. Internal pull high default.
Active low.
P1-9
UART_TX
UART transmit. Reserve test point for firmware
upgrade.
P1-10
UART_RX
UART receive. Reserve test point for firmware
upgrade.
P1-11
NC
Not used
P1-12
NC
Not used
P1-13
GND
Ground
Table 3 P2 Pin definitions