Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 98
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
own network address allocation and account policies, independent from the ones supplied by the service
providers for each of the separate network segments;
"TAP" interface simulates a link layer (L2) device and operates with Ethernet frames.TAPinterface is used
for creating a network bridge.
Interface type Operations
ethX Configure the IP address(es) and the mask of the interface
The IP address(es) of the "ethX" interface is accessible via Ethernet LAN segment only
(it won't be accessible via the "rfX" interface from other neighbor unit)
The IP address(es) of the "ethX" interface is used in the routing process
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
DHCP option is disabled by default
Set the interface description (up to 72 characters)
Set the interface mode (for example: 1000Base-TX-fullduplex) - the default value is
“Auto” (recommended)
rfX Configure the IP address(es) and the mask of the interface
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically
DHCP option is disabled by default
Set the interface description (up to 72 characters)
sviX SVI interface is a logical L3 interface of the switch (solely used for the management of
the unit)
Configure the IP address(es) and the mask of the interface (as the management IP
address(es) of the unit)
Enable/disable the interface
Enable/disable DHCP - obtain an IP address automatically (as the management IP
address(es) of the unit)
DHCP option is disabled by default
Set the interface description (up to 72 characters)
Remove the interface
Set the Switch group number which this interface is assigned to (bind the SVI
interface to a switch group)