Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 87
•
•
•
•
•
Each row corresponds to a certain bitrate value and can be selected or deselected for participating in the
performance test by marking/unmarking the corresponding check-box on the right side. By marking “Select all”
check-box, all the bitrates could be selected or deselected at once.
Three more parameters are available for management:
“Test time” parameter - allows setting the duration (in seconds) of the test for each bitrate (5s by default).
“Bidirectional” check-box - allows choosing between bi-directional (when checked) and unidirectional (when
unchecked) performance test.
"Priority (0-16)"- by default, it is 16, which is lower than the data traffic that has priority 15. You can increase
the test priority by setting a lower value.
"Packet size" -allows to set the desired packet size in bytes.
"Load limit" -sets a limit on the data rate at which the test runs, in Mbps.
7.2.5.2 Antenna Alignment Tool
The "Antenna Alignment Tool" allows to visualize the signal characteristics on both sides of the link in order to
make the antenna alignment process more accurate and easier.
The accuracy of the antenna alignment at the neighbor device is very important for the link quality.
38 Figure - Alignment test
By clicking the «Start Test»/«Stop Test» buttons at the bottom of the page, you can start/stop the alignment test.
By clicking the «Clear History» button, you delete all data stored from the moment you clicked the «Start Test»
button.
By clicking the «Exit Test» button, you return to the "Device Status" page.
Once the test is started, the antenna alignment can be monitored using the graphic and text indicators. The
indicators for both local and remote devices are displayed together in the same page which allows viewing the
alignment process for both sides of the link.
Each side of the link (local and remote) has two similar test indicator sets, corresponding to each antenna
polarization (one for Vertical polarization and another for Horizontal). This allows controlling the alignment process
for each antenna polarization for the local and for the remote device simultaneously.
Graphical indicator: