Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 76
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Param
eter
Description
Status Gives a color indication for the wireless connection quality with the neighbor unit:
Red: poor connection
Yellow: good connection
Green: excellent connection
Link Uptime. Displays the link uptime
F – relevance of remote unit firmware (optional). Idicates that the remote unit has the older
firmware than the local one
? – system password of the remote unit (optional). Idicates that the remote unit has not the
system password
E – Ethernet port status on the remote device (optional). Indicates that the remote device Ethernet
port is flapping
MAC
Addre
ss
Displays the neighbor’s MAC address
Name Displays the neighbor’s name
Node
ID
Displays the sequential number of the neighboring node
Distan
ce
Displays the calculated (theoretical) distance to the neighbor unit (in Km)
Deflection angle from the main antenna direction towards the subscriber terminal, in the
column"Distance" (only forsector base station with "Q" index, which have antanna with
beamforming technology support).
Tx
Power
Displays the power level of the Tx and Rx signals of the neighbor unit (in dBm)
RSSI Displays the received signal level in dBm, the optimal value is in the range from -60 to -40. "*"–
indicates the difference in the signals power of the vertical and horizontal polarizations
SNR Displays the ratio of the useful signal power to the noise power for the input and output signals at
the neighbor unit (in dB). For radio link stable operation, the SNR value must in the range of 12-50
dB, higher modulation are available at values of 27-50 dB
EVM Displays the input signal quality in dB. For stable operation, its absolute value should be as high as
possible - not less than 21 dB
Bitrat
e
Displays the set bitrate value for the Tx and Rx signals of the neighbor unit
Retrie
s
Displays the percentage of Tx and Rx retries of the neighbor unit