Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 75
•
•
•
•
•
•
•
•
•
•
•
•
•
Parameter Description
Load Displays the packet flow through each interface in real-time (for the
system and the data traffic)
7 Table - Interface Statistics
All these counters can be reset by clicking the«Reset All Counters»button:
22 Figure - Counters reset
7.2.2 Links Statistics on rf6.0
This section displays the following information for the radio interface of the unit:
Node name and ID
Noise level
Number of established links
ATPC status (activated or deactivated)
Autobitrate status (activated or deactivated)
Operational mode of the unit (Master/Slave)
For Master - current TDMA parameters:
Time slot duration (in microseconds)
Downlink percentage of the time slot
Maximum RSSI level (in dBm)
Maximum operational distance (in kilometers)
RX/TX Capacity
CAUTION
Clearing these counters by clicking the «OK» button in the pop-up page means losing the history data
about the functionality of your unit. Avoid this operation unless you are completely sure you don’t need
these data in the future. If you are not sure you want to permanently delete all statistics of the device for
previous periods without the possibility to recover, click the «Cancel» button.