Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 74
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Following parameters are displayed in the "Interface Statistics" section:
Parameter Description
Interface Displays all physical and logical set interfaces
MAC Address Displays the MAC address of each interface
Status Displays for each interface whether it is “up and running” or not
Mode Displays the operation mode of each interface.
Ethernet interface:
10,100 or 1000 Mbps;
Half or full duplex mode - red value of this parameter
informs that transmission is performed in a half-duplex
mode.
Radio interface:
Bitrate;
Operating frequency - red value of this parameter
indicates an absence of data transmission due to the
spectrum scanning by the DFS tool;
Channel width;
TX Power - red value for this parameter may indicate a
problem with the transceiver's hardware.;
DFS tool state;
Greenfield mode.
SVI:
Switch group number.
PRF interface:
Parent;
Channel number;
Frame size - red value of this parameter means
impossibility to set the optimal size due to external
limitation (MTU value on the switch port).
Vlan interface:
Parent;
Vlan ID;
Selected vlan interface operation standard.
Packets Displays the number of received and transmitted packets for each
interface since the unit is operational. The local system packets are
counted, too (and not only the ones that are passing through the
switching groups - data traffic)
Errors Displays the number of received and transmitted error packets for each
interface since the unit is operational