Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 73
•
•
•
•
•
•
•
•
•
•
•
20 Figure - HTTPS connection
7.2 Device Status
The "Device Status" page is displayed by default after the authentication step. It displays the main parameters of
the unit in real-time.
You can set the "Auto Refresh" option to refresh the statistics automatically. Refresh frequency can be set by the
"Auto Refresh Time" parameter. The minimal possible value is “0” seconds and it updates the information instantly.
These options are available in the bottom-left side of the "Device Status" screen:
21 Figure - Refresh option
The device statistics can also be refreshed manually by clicking the «Refresh» button.
The "Device Status" page has the following sections:
"CPU load" - displays the load percentage of the CPU
"Memory load":
Memory (the data stored in volatile memory are valid only during the current session, until the
system reset) displays in real-time the total memory available and the used memory by the running
processes
Flash memory (non-volatile memory) displays in real-time the total memory available and the used
memory by theWANFleXand configuration files
"Interface Statistics" - displays the main parameters of all configured interfaces (physical and logical)
"Wireless Links Statistics" - displays the main parameters of all wireless connections between the device and
the neighbor devices
"Switch Statistics" - displays counters of the frames which have been switched or dropped.
7.2.1 Interface Statistics
The software version is displayed in the right side of Interface Statistics section (for example: TDMAv2.1.26).
In case of connection to the AUX-ODU-SYNC synchronization unit, the number of visible GPS/GLONASS satellites will
be displayed as well asthe current device synchronization status:
"Sync": the device is in sync. The value in brackets is current value of the offset (in microseconds) between
the internal clock of the device and the external timing reference from GPS/GLONASS
"Wait Sync": the device is waiting the external timing reference from GPS/GLONASS
"Lost Sync": the connecting to theAUX-ODU-SYNC was lost
"No Sync": the device is not in sync. The current value of offset between the internal clock and the external
timing reference from GPS/GLONASS is beyond the allowed value range (±10 microseconds)