Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Installation – 69
•
•
As soon as the antennas have been precisely alignment, set the "auto" option for Tx power and bitrate at both units
and select values in accordance withthe EIRP limitations.
Depending on the values for SNR, RSSI, retries and current bitrate, change the following parameters:
Decrease/increase the Tx power level (keeping the auto option checked) to have the SNR at around 25 dB
and the RSSI at around -55 dBm.
Decrease the bandwidth to lower the noise and to increase the SNR to above 20 dB.