Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Installation – 53
6.1.2 MONT-KIT-85P Mounting kit
H
igh precision mounting kitMONT-KIT-85Pallows to make reliable and easy installation and enables extremely
accurate adjustment on azimuth and elevation for optimal wireless link performance. Compatible for Quanta 5,
Quanta 6, InfiLINK 2x2, InfiMAN 2x2,InfiLINK Evolution,InfiMAN Evolution, InfiLINK XG, InfiLINK XG 1000 families
units. Especially suitable for installing high-gain antenna models that have a narrow beam.
6.1.2.1 Packing List
6.1.2.2 Assemble Procedure
Step 1: Insert and tighten the Assembled kit on the back side of the device using bolts M6x14, washers flat 6 and
washers spring 6.
Step 2: Tighten the Assembled kit and Bracer to the pole using bolt M8, washer flat 8 and washer spring 8.
NOTE
Clamps and other optional fasteners are not included in the Mounting kit MONT-KIT-85.