Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
7 https://wiki.infinetwireless.com/display/DR/Connection+to+the+synchronization+unit
Introduction – 37
3.7.3.1 InfiMAN 2x2 and InfiLINK 2x2 PRO
To connect AUX-ODU-SYNC to ODU insert the INFINET connector of theCAB-SYNCcable to the console port of ODU
and tighten the cap nut.
3.7.3.2 InfiMAN Evolution base station sector
To connectAUX-ODU-SYNCto ODU insert the RJ-45 connector with INFINET cable gland of the CAB-SYNC-Einto the
corresponding socket of the ODU until you hear a click. Performthe device port insulation with a cable gland as
instructed above.
3.8 Packing List
Before the installation, please make sure you have all necessary parts and accessories.
•
•
NOTE
Synchronization settings with AUX-ODU-SYNC is described in the document:
InfiLINK 2x2 PRO, InfiMAN 2x2 BS
7
.
InfiMAN Evolution BS(see page 39).