Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Introduction – 18
Subscriber Terminals and PTP devices Interfaces
RJ-45 socket for connecting to power supply and network via the PoE power supply.The network connection to the
ODU is made via a 1000Base-T (Gigabit) Ethernetconnection. Power is provided to the ODU over the 1000Base-T
Ethernet connection usingastandard IEEE 802.3atpassive PoE power supply.
LED Panel
PWR - power indicators will lightredwhen the device is connected to a power source, yellow when10/100
Mbpswired connection appears and green when 1000 Mbpswired connection appears. Other indicators are used to
perform coarse antenna alignment.The more indicators are on, the better wireless connection is established. The
blinking indicator means an intermediate state. The more often the indicator blinks the higher level connection is
established.
3.4.2 Part number description
InfiLINK Evolution /InfiMAN Evolution part number has the following structure
Structure items are described below