Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
54 https://wiki.infinetwireless.com/pages/viewpage.action?pageId=42274923#mintcommand(TDMAversion)-CurrentConnectionsInformation
55 https://wiki.infinetwireless.com/pages/viewpage.action?pageId=43827064
Troubleshooting – 162
•
•
•
•
•
•
•
For detailed description of the link parameters proceed to the"Device Status menu(see page 73)"article.
Command line interface
To display information about the wireless link status via the command line interface, use the "mint rf6.0 map
detail
54
" command.
102 Figure - The "mint rf6.0 map detail" command output
Pay attention to the indicators in the "Options" column. The following values are possible:
M - Master device;
S -Slave device;
TM - Master device with software having support for the TDMA technology;
L - the throughput is limited by license;
F - the software version is older than the one on the local device.
A question mark in front of the remote's device name indicates that it has no password.
Pay attention to the "*" symbol, which can represent the following:
At the "pwr" column - hardware device failure.
At the "rssi" column -significant difference between the signal power of the vertical and horizontal
polarizations.
8.4.2.2
Radio statistics
Command line interface
To display statistics via the command line interface, use the ""
rfconfig stat
55
" command.