Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Introduction – 16
•
•
•
1x Gigabit Ethernet port (10/100/1000 Base‑T), RJ‑45 connector: Data + Power.
1x SFP port: Data.
1x SYNC port for AUX‑ODU‑SYNC connection.
Interface Description
Gigabit Ethernet RJ-45 socket for connecting to power supply and data transmission.The
network connection to the wireless device is made via a 1000Base-T
(Gigabit) Ethernetconnection. Power is provided to the device over the
1000Base-T Ethernet connection usingastandard IEEE 802.3atpassive
PoE power supply.
SFP External optical Gigabit port for plugging of the optical SFP transceiver
module.
SYNC RJ-45 socket for connecting to synchronization unit AUX‑ODU‑SYNC.
LEDs
LED St
at
e
Status Description
Gigabit
Ethernet
SFP
Fla
sh
Initialization The LEDs on both ports light up with white on second. Then LEDs
check is performed: red, blue, green are lightened up sequentially.
Fla
sh
Loading Only for Gigabit Ethernet port: at the beginning green is lightened
a few seconds, on the second loading stage switches to blue.
O
N/
Bl
ue
Power Only for Gigabit Ethernet port.
O
N/
Re
d
Speed 10 Mbps Only for Gigabit Ethernet port.
O
N/
Yel
lo
w
Speed 100 Mbps Only for Gigabit Ethernet port.
NOTE
Power and wired statuses indication is performed via glassy plug of the cable gland.