Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
47 https://wiki.infinetwireless.com/display/DR/svi+command
48 https://wiki.infinetwireless.com/pages/viewpage.action?pageId=10781004
49 https://wiki.infinetwireless.com/display/DR/switch+command
50 https://wiki.infinetwireless.com/pages/viewpage.action?pageId=42274923#mintcommand(TDMAversion)-CurrentConnectionsInformation
Troubleshooting – 159
•
•
•
8.3.1.2 Filtering rules
Pay attention to the traffic filtering rules in the switch group and in the"
IP Firewall menu (see page 128)"
subsection(point 2).
98 Figure - Display configuration
8.3.2 Checking the switch settings on the remote device
8.3.2.1 Device management
Make sure that the switch group for the device management is configured correctly(see point 3 in the figure above):
To access the device via the radio interface, the rf6.0 interface must be added to the management switch
group.
The svi interface must be associated with the switch group. The interface can be associated using the "
svi
47
"
command(point 4).
The device's management IP address must be assigned to the svi interface using the "ifconfig
48
"
command(point 1). The switch groups are configured using the "switch
49
" command.
8.3.2.2 Checking the members of the switch group
To display information about the devices included in the switch groups, use the "
mint rf6.0 map swg
50
" command.
99 Figure - Checking the switch group