Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 149
83 Figure - DFS
7.7 Command Line menu
The "Command Line" page emulates CLI (command line interface) in the Web interface. This allows managing and
monitoring the device by using all the commands and functions that are available via standard CLI.
In order to run one or a set of WANFleX commands, type them in the commandfield and then click the «Execute»
button. The output of the commands is displayed in the section above the commandfield:
84 Figure - Command line
In the "Command Line" menu, the commands are only executed, but not saved into the configuration. To execute
the command and save it in the device configuration, use the "config save" command.
CAUTION
After changing the configuration in the web interface, the commands that were previously applied through
the CLI and are missing in the web interface will be lost. To add these commands use the "Basic settings" -
"Additional commands" section.