Product Info
Table Of Contents
- About This Manual
- Important Notice
- Introduction
- Document structure
- Document marks
- Key Features
- Hardware Platform
- Power supply
- Lightning protection unit
- Synchronization unit
- // 0) { /* For each inline-commented element clear data-ref and class */ for (var i=0; i < commentedElements.length; i++) { commentedElements[i].dataset.ref= ""; commentedElements[i].className = ""; } } /* Else do nothing */ } }); //]> AUX-ODU-SYNC Mounting
- AUX-ODU-SYNC Cable gland Assembling
- AUX-ODU-SYNC Connection to ODU
- Packing List
- Planning considerations
- Link Pre-configuration in the lab
- Installation
- Operation & Administration
- Troubleshooting
- Glossary
Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 142
76 Figure – Installation confirmation
7.4.1.2 Firmware update
The firmware can be updated in two ways: automatically and manually.
Automatic update
The system checks automatically for the firmware updates on the InfiNet Wireless repository and displays a warning
message for 10s at each login to the Web interface if a new software version is available:
In case of new software version availability, after clicking the «Check Latest Release» button, the system provides
the following options:
77 Figure - New firmware availability
By clicking the «Upgrade Firmware» button, the system starts the firmware upgrade process automatically:
78 Figure - Firmware upgrade
After the firmware upgrade process ends, you have to reboot the unit before using the new software version:
NOTE
It is not mandatory for the unit to have access to the Internet for this feature to work. However, the PC that
is used to initialize the upgrade procedure must have access to Infinet Wireless website (both http and ftp).