Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 138
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Traffic shaping rule parameter Description
Channel Select the logical channel from the dropdown list
All the parameters of this rule are applied to this channel
Priority Set the priority for the packets going through the new rule of
the filter:
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Direction Set the input/output direction for applying the new rule:
“Input” - the rule is used to process inbound traffic
“Output” - the rule is used to process outbound traffic
and for post-routing packet filtering
Interface Set the interface for applying the new rule
All the available interfaces are displayed in the dropdown list
(physical and logical)
If “any” option is used, the rule is applied to all available
interfaces
Group Set the Switch Group number for the applying of the new
rule
The Switch Group must be prior created
Rule Set the packet capture filter
It is the same syntax called “PCAP expression”, as in the
"Switching" section
Refer to the filter expression syntax description above
Validate the rule by clicking the «Validate» button
29 Table - Traffic shaping rules
You can delete an existed traffic shaping rule by clicking the corresponding «Remove Rule» button.
7.3.10 Extra commands
The "Extra Commands" section allows you to take advantage of theCLIconfiguration flexibility within the Web
interface. While the Web interface is simple to use and understand, there are several parameters that can be
configured viaCLIonly.
CAUTION
