Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 137
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Logical channel parameter Description
PPS Set the maximum packet per second rate (in pps)
You can limit the data traffic within a logical channel to a
certain rate of packets per second
Latency Set latency value (between 5 ms and 200 ms) for each channel
(queue length)
Leave it empty for the default value
Determines the maximum time the packets can to stay in the
queue
Packets are discarded if they are still in the queue after the
value set for latency is reached
Parent Class Establish affiliation to a class.
Ceil Available only if the parent class is specified.
Set the maximum non-guaranteed transmit rate in a percentage
of the higher-class band or in Kbps.
If no value is specified, the free transmit rate of the class is
distributed evenly between the channels, depending on the
load.
Priority Allocate the priority for all the packets going through a specific
rule:
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a lower
priority
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Redirect To Set the gateway IP address (only for the router mode)
The whole stream is redirected to the specified IP-address
regardless of the current routing configuration
It may be useful when the router serves as a network access
unit and two or more different clients want to access different
providers through one unit
Information Set a description for the logical channel created
28 Table - Logical channel parameters
You can delete an existed logical channel by clicking the corresponding «Remove Channel» button.
You can create a traffic shaping rule by clicking the «Add Rule» button.