Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 136
•
•
•
•
•
•
•
QoS
Parameter
Description
ICMP
Prioritization
Enable/disable automatic prioritization for ICMP packets
Allow ICMP traffic prioritization
It does not increase the priority of "ping" packets (although they are ICMP packets)
27 Table - QoS
7.3.9 Traffic Shaping
The "Traffic Shaping" section allows to manipulate the data streams flowing through the device. Up to 200 logical
channels can be created, characterized by different properties (such as priority levels and data transfer rates), and
then the data streams can beassigned to these logical channels according to the special rules, previously created.
In order to configure distribution of the transmit ratebetween several channels, can be created the class.
In the default configuration, there is no channel or class created.
Create the classby clicking the"Add Class" button, to set the transmit rateredistribution for one or more channels.
Parameter Description
Class Service class number in the range 1-200
Max Maximal available transmit rate in Kbps
You can delete an existed class by clicking the corresponding "Remove Class" button.
70 Figure - Traffic Shaping options
In order to prioritize the data flows and/or to set the data transfer rates, create the logical channels by clicking the
"Add Channel" button.
The following parameters can be configured in the "Traffic Shaping" section for the logical channels:
Logical channel parameter Description
Channel Logical channel number (1-200 allowed)
Max Set the maximum transmit rate (in Kbps)
You can limit the data traffic within a logical channel to a
certain rate of kilobits per second
The value can also be set in percentage of the class.