Product Info

Infinet Wireless: Technical Documentation – InfiMAN Evolution
Operation & Administration – 130
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
IP firewall rule parameter Description
Channel Allocate a logical channel if there are logical channels prior
created in "Traffic Shaping (see page 136)" section (it is active
only if the action "permit" is selected)
If you allocate a number for a logical channel that was not
prior created in "Traffic Shaping" section, it has no effect in
the rule configuration
For the indications how to create a logical channel, please
refer to "Traffic Shaping" section below
Priority Set the priority for the packets going through the new rule of
the filter:
“Up to” - used to increase the packet priority to the
specified value only if the processed packet has a
lower priority
“Set” - used to assign a new priority regardless of the
value already assigned to the packet
Log Enable/disable filter actions logging in the system log
Direction Set the input/output direction for applying the new rule:
“Input” - the rule is used to process inbound traffic
“Output” - the rule is used to process outbound traffic
and for post-routing packet filtering
Interface Set the interface for applying the new rule
All the available interfaces are displayed in the dropdown list
(physical and logical)
If “any” option is used, the rule is applied to all available
interfaces
Group Set the Switch Group number for the applying of the new rule
The Switch Group must be prior created
Rule Set the packet capture filter for IP firewall
It is the same syntax called “PCAP expression”, as in the
"Switching" section
Refer to the filter expression syntax description above
By clicking the «Validate» button, you can check the syntax in
the expression in the “Rule” field
23 Table - IP Firewall
The «Up/Down» arrows allow you to organize rules list. The rules are processed one by one in a top-down order.